- List your item for as low as $40 - Advertise your item in both print and online
More Information
Are you a Dealer? Contact us to advertise: helpdesk@twrmedia.co.nz
Cheviot Transport has been servicing the town and surrounding rural areas in many guises since the ’50s, with various ownership over the year+MORE
Cat Certified Used Equipment from Terra Cat is proving to be a popular choice for buyers who need a modern piece of equipment that has low hours and has been thoroughly...+MORE
Trade Safely. Use our anti-scam guide to protect yourself.
show
results
2 x N150 batteries $200 plus gst each 2 x N200 batteries $200 plus gst each
NO5C UJ Engine out of a out of a 2022 Hino 300
128,000km
C15 Engine Reference A90
2017 Man TGX Engine out and ready to go
Work done to the engine below Tested the Cummins ISX engine for causes of excessive fuming from the breather. Confirmed the excessive fuming was caused by worn piston rings. The decision was made to rebuild the engine. Disassembled the engine removing the cylinder head and all pistons and cylinder liners. Cleaned the engine block and checked all components for re-usability. Rebuilt the engine with an inframe engine rebuild kit. Replaced the main crankshaft bearings. Fitted new pistons and cylinder liners with new rings and crankshaft bearings. Replaced the worn engine oil pump. Fitted a reconditioned cylinder head to the engine as supplied with new gaskets and seals. Reassembled the engine and top tuned. Refilled with new oil and coolant. Started and test ran. Road tested the vehicle and rechecked the engine for faults, all ok.
Removed the sump from the engine. removed the oil pump and pick up. Removed the crankshaft big end and main bearing caps. Inspected the crankshaft and bearings, found the crankshaft in a good condition with normal wear to the bearings. Fitted a new set of big end, main and thrust bearings. Torqued all components to spec. Checked the oil pump and found it to be worn. Fitted a new oil pump and refitted the pick up. Refitted the sump with a new gasket. Removed the rocker cover and inspected the camshaft and rockers for wear, all ok. Found the rocker arm on #1 injector had a missing wear foot. Removed the engine brake and rocker shaft and replaced the injector rocker with a good second hand one. Refitted the rocker shaft and top tuned the engine adjusting the valve clearances, injector heights and Jacobs brake settings. Resealed and refitted the rocker covers. Changed the oil and fuel filters and filled the engine with new oil.
260,000kms
Polished fuel tanks available now. All makes and models
Out of a 2013 Mitsi Fighter
The item you are attempting to add to compare is a different subtype to the items(s) in your list.
Only items of the same subtype may be compared.
